Home › Packages › Smart Thermostat & Room-by-Room Heating
Smart Thermostat & Room-by-Room Heating
Stop heating an empty house.
A smart thermostat matched to your heating system, room sensors that keep the rooms you use comfortable, and control for mini-split heat pumps — so heat follows people, not the floor plan.
Check My Heating SetupWhat’s included ↓
Free consultation. No obligation to buy.
Typical setup · thermostat + 1 room sensor
approx. $475–$575 CAD
Smart thermostat matched to your heating system, room sensor, configuration and setup support. Your final equipment and price are confirmed in a written quote before you pay.
- Matched to your heating type
- Away mode when everyone leaves
- Remote control from your phone
- Monthly energy report
Canadian-owned · Manufacturer warranty · 30-day setup support
Why Canadians Use It
Your heating runs on the worst-case assumption.
Matched to your heating.
Forced air, baseboard, heat pump, oil or gas — we confirm the right control for your system before you order.
Warm when you’re home, not when you’re not.
The house sets back when everyone leaves and warms up before you’re back.
Heat pumps, finally coordinated.
Mini-splits and backup heat work together instead of fighting each other.
How It Works
Heating decisions made at home, visible on your phone.
Home Heating
● Away · set back to 17 °C
A schedule built around when you’re actually home, asleep or away.
Room sensors keep occupied rooms comfortable and let empty ones cool.
Change the temperature from anywhere and see what heating costs each month.
View technical architecture
- Thermostat: a smart thermostat compatible with forced air, heat pump, oil and gas systems; we check your wiring first.
- Room sensors: the thermostat’s own sensor, or radar presence sensors that detect people sitting still, with a home controller.
- Heat pumps: mini-split controllers for each indoor unit, with switch-over to backup heat by outdoor temperature.
- Baseboard heat: line-voltage baseboards need dedicated line-voltage thermostats; we quote these separately.
- Offline: the thermostat keeps its schedule without internet; remote control and reports need a connection.
- App: today, the thermostat’s own app, or Home Assistant for room and heat pump control. The IoTiq app is in early access and is not required.
What’s Included
Everything a typical home needs. Nothing it doesn’t.
Below is the setup for a house with one central heating system. Mini-splits and baseboards are covered under other sizes.
Matched to your furnace, boiler or central heat pump.
For the bedroom or the room you use most.
Built around your actual week, with automatic setback.
Heating use compared with last month.
Wiring check before ordering, guided installation and a 30-day follow-up.
On every device, plus IoTiq support during setup.
Outages
What happens if the internet or power goes out?
Straight answers, because this is exactly when you need the system to work.
| Situation | Heating control | Remote control & reports |
|---|---|---|
| Power and internet working | ✓ Schedule, away mode and room control | ✓ Yes |
| Internet down, power on | ✓ Keeps running your schedule | ✕ Remote changes and reports wait |
| Power out | ✕ Most heating systems stop without power | ✕ No |
| Heat pump can’t keep up in deep cold | ✓ Switches to backup heat (with heat pump control) | ✓ Alert when backup heat runs |
| Older wiring without a common wire | ! May need an adapter | ✓ Checked before you order |
Pricing
What you’ll pay, before you pay it.
Your written quote lists every line below. No surprise fees after installation.
| Item | What it covers | Typical cost |
|---|---|---|
| Included in the setup price | ||
| Equipment & configuration | Smart thermostat with one room sensor, matched to your system | approx. $475–$575 |
| Guided installation | Most thermostats take 30–45 minutes; we check your wiring first | Included |
| Other sizes | ||
| Room-by-room heating | Adds three radar room sensors and a home controller, so heat follows occupied rooms | approx. $1,100–$1,350 |
| Heat pump control | Adds controllers for up to three mini-splits with backup-heat switch-over | approx. $1,375–$1,650 |
| Electric baseboards | Line-voltage smart thermostats for each baseboard zone | Quoted |
| Ongoing | ||
| Subscription | No subscription is required | $0 |
| Support plan | Optional, after the first 30 days | from $15 / month |
| Optional extras | ||
| Extra room sensor | Another bedroom, office or basement | approx. $50–$70 each |
| Energy monitoring | See what heating actually costs, circuit by circuit | See Energy Monitoring System |
Approximate prices in CAD before HST/GST. Your written quote confirms the final price and taxes.
Know What You’re Getting
Clear about what it does — and what it doesn’t.
Your exact configuration, in writing
Before you order, your quote lists every device, its quantity, where it goes and which features it supports.
Manufacturer-backed hardware
Every device carries its manufacturer’s warranty. We tell you the warranty length for each one in your quote.
Savings depend on your home
Thermostat makers report typical heating and cooling savings of around 10–15%, but your result depends on your home, climate and habits. We don’t promise a specific saving.
Setup
From your first question to a working system.
Tell us about your heating. Furnace, boiler, heat pumps or baseboards, and a photo of your current thermostat wiring.
Receive your configuration. The right thermostat or controllers, room sensors and total cost — in writing.
Install and connect. Guided installation, usually 30–45 minutes, or professional installation in select areas.
Build your schedule. Home, away and sleep times, and room priorities, set up with you.
30-day follow-up. We check comfort and the first energy report, and adjust the schedule.
Four questions to think about before you order
Not sure? That’s fine — we check them with you during the free assessment.
What heats your home?Forced air, boiler, central heat pump, mini-splits or baseboards.
Can you photograph your current thermostat wiring?It tells us whether an adapter is needed.
Which rooms matter most?Bedrooms, an office or a basement suite — they get the sensors.
Is the home often empty?Away mode and freeze alerts matter more for cottages and rentals.
Privacy & data handling
Temperature, schedule and occupancy data are stored on the thermostat and, with room control, on the controller in your home. Some thermostats also use their maker’s cloud for remote access and reports; before setup we confirm in writing which features rely on it. No cameras or microphones are involved. How IoTiq handles data →
FAQ
Questions about smart heating.
How much will I save?+−
Thermostat makers report typical heating and cooling savings of around 10–15%. Your result depends on your home, climate and habits.
I only have mini-splits, no central thermostat. Does this work?+−
Yes. The heat pump control option uses a controller for each indoor unit.
Does it work with electric baseboards?+−
Baseboards need line-voltage smart thermostats, one per zone. We quote these separately.
Does it work with a thermostat I already own?+−
Often, yes. We can add room sensors and automations around an existing smart thermostat.
What happens if the internet goes down?+−
The thermostat keeps running your schedule. Remote control and reports wait for the connection.
Is there a monthly fee?+−
No.
Check My Heating Setup
Tell us about your heating.
Four quick questions. We reply by email with a recommended setup and a written quote.
We use your information only to respond to this request. No obligation to buy, and no marketing emails unless you ask for them.